|
Sales contact
USA: (530) 265-1000 Europe: +44 (0) 118 952 3400 Canada: (514) 333-1772 Asia: +852-2539-6987 |
| VIDEO INPUT/OUTPUT | |
| Signal (1): | SMPTE-259M-C (270 Mbps), |
| SMPTE-292M (1.485, 1.485/1.001Gbps), | |
| SMPTE-424M (2.970, 2.970/1.001Gbps) | |
| Supported formats: | SD: 480i59.94, 576i50 |
| HD: SMPTE-274M: 1080i59.94, 1080i50 | |
| HD: SMPTE-296M: 720p59.94, 720p50 | |
| 3Gbps: SMPTE-425M level A (mapping 1), level B: 1080p59.94, 1080p50 | |
| Cable length *: | 300 m Belden 1694A at 270 Mbps |
| 150 m Belden 1694A at 1.485Gbps | |
| 120 m Belden 1694A at 2.970Gbps | |
| Return loss *: | >15 dB up to 3 GHz |
| Jitter: | HD/SD: <0.2 UI |
| 3Gbps: <0.3 UI | |
| REFERENCE INPUT | |
| Signal: | SMPTE 170M/SMPTE 318M/ITU 624-4 black burst |
| SMPTE 274M / SMPTE 296M tri-level Sync | |
| Return loss: | >35 dB up to 5.75 MHz |
| GPIO | |
| Signal (3): | Contact closure to ground |
| Connector: | RJ-45 |
| Direction: | Bidirectional (application specific) |
| RS-422 | |
| Signal (2): | RS-422 |
| Input level: | 300 mVp-p (min) |
| Output level: | 3 Vp-p (min) |
| Rate: | 115,200 Bd |
| VIDEO PROCESSING PERFORMANCE | |
| Signal path: | 10 bits |
| Processing | |
| delay (HD): | 8 μs (in minimum delay mode) |
| Additional delay: | Up to 15 frames upon user selection |
| AUDIO PROCESSING PERFORMANCE | |
| Quantization: | 24 bits |
| Sampling: | 48 kHz, synchronous |
| Audio latency: | 2 to 6 ms in minimum processing delay depending on processing options |
| Audio delay: | Up to 2 s (1 ms steps) |
| ELECTRICAL | |
| Power: | 12.5 W |
| * Cable length and return loss specifications will be reduced when using the EAP-3901-3SRP-R rear connector | |
home | products | solutions | support | news | company | investors | resources | careers | contacts |