Kaleido-Modular

Space saving, single and dual quad-split multiviewer (4 x 1 / 8 x 2)

  • Kaleido-Modular cards
  • KMV-3911-4X1Kaleido-Modular HD/SD-SDI 4x1 multiviewer with HD-SDI outputs
  • KMV-3911-4X2Kaleido-Modular HD/SD-SDI 4x2 multiviewer with HD-SDI outputs
  • KMV-3911-8X1Kaleido-Modular HD/SD-SDI 8x1 multiviewer with HD-SDI outputs
  • KMV-3911-8X2Kaleido-Modular HD/SD-SDI 8x2 multiviewer with HD-SDI outputs
  • KMV-39N1-NX1-OPT-OP2Output two enabled license
  • KMV-3911-8X2-3DRPDouble rear connector panel
  • Note: Can be used with either Densité 3 or Densité 3 mini but frame must be equipped with ETH2 controller in order to insure proper functionality.
  • Options
  • KMV-3901-8XN-BRIDGECascading bridge for KMV-3901-8XN modules
  • Note: One bridge per pair of cards, can cascade up to 3 KMV-3901-8x2 modules
  • KMV-39N1-8XN-OPT-3GBPS3 Gbps signal decoding option (8 inputs)
  • KMV-39NN-8x1-OPT-3DLAStereoscopic display license (line alternate mode) for KMV-3911-8x1
  • KMV-39NN-8x2-OPT-3DLAStereoscopic display license (line alternate mode) for KMV-3911-8x2
  • DXF-200-COptical extension system w/HDMI+L- HDMI cable
  • DXF-200-PSU DXF-200 power supply (1x sub-module)
  • KALEIDO-RCP2Ethernet remote control panel and KM Gateway
  • KRCP-RK2Kaleido-RCP2 rack mount bracket
  • RCP-200Advanced remote control panel for models and accessories
  • NSH26MTerminal block adaptor for HD-26 connections (for audio I/O connections)
  • KXC-HDMI-DVIHDMI to DVI female cable (1 ft)
  • Third-party interface options
  • KMV-39N1-8XN-OPT-RT-NVISIONControl and UMD support for NVISION routers
  • KMV-39N1-8XN-OPT-RT-DATATEKControl and UMD support for Datatek routers
  • KMV-39N1-8XN-OPT-RT-ENCOREControl and UMD support for Encore controllers
  • KMV-39N1-8XN-OPT-RT-EVERTZControl and UMD support for Evertz routers
  • KMV-39N1-8XN-OPT-RT-GVG7000Control and UMD support for GVG7000 routers
  • KMV-39N1-8XN-OPT-RT-JUPITERControl and UMD support for Jupiter routers
  • KMV-39N1-8XN-OPT-RT-HARRISControl and UMD support for Harris routers
  • KMV-39N1-8XN-OPT-RT-NETWORKControl and UMD support for Nevion routers
  • KMV-39N1-8XN-OPT-RT-SNELLControl and UMD support for Snell routers
  • KMV-39N1-8XN-OPT-RT-PESAControl and UMD support for PESA routers
  • KMV-39N1-8XN-OPT-RT-UTAHControl and UMD support for Utah routers
  • KMV-39N1-8XN-OPT-TLY-KAHUNATally interface for Snell and Wilcox Kahuna switchers
  • KMV-39N1-8XN-OPT-TLY-KALYPSOTally interface for Thomson Kalypso switchers
  • KMV-39N1-8XN-OPT-TLY-KAYAKTally interface for Thomson Kayak switchers
  • KMV-39N1-8XN-OPT-TLY-SONYTally interface for Sony switchers (serial protocol)
  • KMV-39N1-8XN-OPT-TLY-SYNERGYTally interface for Ross Synergy and Vision switchers
  • KMV-39N1-8XN-OPT-TLY-ZODIAKTally interface for Thomson Zodiac switchers
  • Housing frames and options
  • Densité 3Housing frame with (1) PSU (AC-IN), (1) Ethernet controller with front control panel, blank rear
  • Densité 3-PSU-ACRedundant PSU for Densité 3
  • Densité 3-CPU-ETH2-OPT-LNKFull link redundancy using channel bounding on Densité-CPU-ETH2
  • REF-1801-3RUReference card for Densité 3 frame (including 3RU adapter)
  • REF-1801-SRP-3RUSingle rear connector panel for REF-1801 (including 3RU adapter)
  • Densité 3 miniHousing frame with (1) PSU (AC-IN), (1) basic controller with front control panel, (1) blank rear panels SRP
  • Densité 3 mini PSURedundant external PSU for Densité 3 mini
  • Densité 3 mini-Tray1RU tray for two Densité 3 mini frames
  • Densité 3 mini-CPU-ETH2Controller card with redundant Ethernet ports
  • Densité 3-CPU-ETH2-OPT-LNKFull link redundancy using channel bounding on Densité 3 mini-CPU-ETH2
  • Note: The KMV-3911 can only be used with Densité 3 or Densité 3 mini frames with ETH2 controllers.