|
Sales contact
USA: (530) 265-1000 Europe: +44 (0) 118 952 3400 Canada: (514) 333-1772 Asia: +852-2539-6987 |
| ELECTRICAL | |
| AC input: | 90-130/180-250 VAC, 50/60 Hz, auto-ranging |
| AC fuses: | Power supplies: 8A (HB0145-00), slow blow; 90-130 V, 6.3A (HB0031-00), slow blow, 180-250 V |
| AC connectors: | 2, IEC 320 |
| AC power: | PS6000, 660 W, one IEC 320 |
| AC power usage: | Power based on PS6000 modules |
| Note: Power consumption dependent on number of cards installed. | |
| 425 W nominal (128 x 128 SD), power factor corrected | |
| 550 W nominal (128 x 128 SWB), power factor corrected | |
| 260 W nominal (128 x 128 analog video), power factor corrected | |
| 500 W nominal (128 x 128 AVC), power factor corrected | |
| 225 W nominal (128 x 128 sync AES), power factor corrected | |
| 625 W nominal (128 x 128 analog audio), power factor corrected | |
| Regulatory compliance: | UL listed and CE compliant |
| MECHNICAL | |
| Dimensions: | 8RU (14.0 in, 355.6 mm) high |
| 19.0 in (483 mm) wide | |
| 18.0 in (457 mm) deep | |
| Weight: | 56 lbs (25.5 kg); 182 lbs (82.7 kg) fully loaded |
| Mounting: | EIA 310-C, 19.0 in (483 mm) |
| Grounding terminal: | Copper, accepts 14-6 AWG |
| Modules and slots: | 8 input cards, 16 signals each |
| 8 crosspoint/output cards, 16 signals each | |
| 2 control cards (1 primary, 1 optional secondary) | |
| 1 fan module 2 PS6000 modules (1 required, 1 optional redundant) | |
| DIAGNOSTIC | |
| Type: | Serial port |
| Connector: | SMPTE 207M, EIA-422/EIA-232, configurable |
| Standard: | 2, DE-9 |
| SERIAL CONTROL | |
| Type: | Serial port (2 per control card) |
| Standard: | SMPTE 207M, EIA-422, configurable |
| Connector: | 4, DE-9 |
| ETHERNET | |
| Type: | 10/100 Base T |
| Standard: | IEEE 802.3 |
| Protocol: | NVISION Ethernet protocol |
| Connector: | 2, RJ-45 |
| GSC NODE BUS | |
| Type: | Serial |
| Standard: | Proprietary |
| Connector: | 2, BNC, loop-thru, non-terminating pair |
| Impedance: | 75 ohm |
| POWER SUPPLY ALARM | |
| Connector: | Phoenix |
| ENVIRONMENTAL SPECIFICATIONS | |
| Operating temperature: | 0 to 40 șC |
| Relative humidity: | 0 to 90 %, non-condensing |
| AUDIO REFERENCE INPUT | |
| Type: | Serial digital audio |
| Standard: | AES3 or AES3id |
| Sample rate: | 48 kHz |
| Connector: | 2, BNC or Phoenix |
| Impedance : | 75 ohm or 110 ohm |
| Input level: | 0.5 Vp-p to 2.0 Vp-p |
| INPUTS/OUTPUTS | |
| Type: | Balanced digital audio |
| Standard: | AES3 |
| Sample rate: | Synchronous 48 kHz; asynchronous 32 to 96 kHz |
| Connector: | Phoenix |
| Impedance: | 110 ohm |
| Input level: | 200 mV to 10 Vp-p |
| Output level: | 2 Vp-p |
| AES3id INPUTS/OUTPUTS | |
| Type: | Unbalanced digital audio |
| Standard: | AES3id |
| Sample rate: | Synchronous 48 kHz; asynchronous32 to 96 kHz |
| Connector: | BNC |
| Impedance: | 75 ohm |
| Input level: | 100 mV to 1.2 Vp-p |
| Output level: | 1 V ±10 % |
| ANALOG AUDIO INPUTS/OUTPUTS | |
| Type: | Analog audio |
| Standard: | 24-bit at 48 kHz |
| Sample rate: | 48 kHz |
| Connector: | DB-25 |
| Impedance: | Input > 20 kohm , output 50 ohm |
| Input level: | FSD, +15, +18 and +24 dBu |
| Output level: | FSD, +15, +18 and +24 dBu, selectable +6 dB gain via switch |
| Freq. response: | 20 Hz to 20 kHz B10.2 dB |
| THD: | <0.02 % at +4 dBu at 1 kHz |
| IMD: | <0.5 % (per SMPTE method using a 60 Hz +12 dBu wave and a 7 kHz 0 dBu sine wave) sine |
| Noise: | 95 dB below +24 dBu |
| Inter-route delay: | <1 μs |
| Input to output delay: | <1.2 ms |
| Crosstalk: | -80 dB worst case |
| Insertion gain: | ±0.1 dB |
| CMRR: | >75 dB from 60 Hz to 20 kHz |
| VIDEO REFERENCE INPUT | |
| Type: | Analog video reference |
| Standard: | PAL, NTSC, or Tri-Level Sync |
| Connector: | Loop-thru, BNC |
| Impedance: | 75 ohm or Hi-Z |
| Input level: | 0.5 Vp-p to 2.0 Vp-p |
| Input return loss: | |
| ≥30 dB to 5 MHz | |
| SD INPUTS/OUTPUTS | |
| Type: | Standard definition serial digital video |
| Standard: | SMPTE 259M and 344M |
| Data rates: | Auto reclocking at 143, 177, or 270 Mbps or auto bypass |
| Data rates: | Pass-through at 10 Mbps to 270 Mbps |
| Connector: | BNC |
| Impedance: | 75 ohm |
| Cable equalization: | 300 m Belden 1694A, or equivalent cable, at 270 Mbps |
| Router path: | Non-inverting |
| INPUT/OUTPUT | |
| Return loss: | >15 dB, 5 to 270 MHz |
| Output level: | |
| ≤800 mVp-p ±10 % | |
| Output rise/fall time: | |
| ≤600 ps +10 % | |
| Output overshoot: | |
| ≤10 % of amplitude max | |
| Output alignment jitter: | |
| ≤0.2 UIpp from 1.0 kHz to 27 MHz | |
| Output timing jitter: | |
| ≤0.2 UIpp from 10 Hz to 1.0 kHz | |
| SWB (SD AND HD) INPUTS/OUTPUTS | |
| Type: | High definition serial digital video |
| Data rate: | SMPTE 259M, 344M and 292M |
| Auto reclocking at 143, 177, 270, 360, 540 Mbps and 1.483 and 1.485 Gbps or auto bypass | |
| Data rate: | Pass-through at 10 Mbps to 1.5 Gbps |
| Connector: | BNC |
| Impedance: | 75 ohm |
| Equalization: | 150 m Belden 1694A, 85 m Belden 1855A, or equivalent cable, at 1.5 Gbps |
| Router path: | Non-inverting |
| Output level: | 800 mVp-p ±10 % |
| Input/output return loss: | >15 dB, 5 MHz to 1.5 GHz |
| Output rise/fall time: | |
| ≤270 ps | |
| Output overshoot: | |
| ≤10% of amplitude max | |
| Output alignment jitter: | |
| ≤0.2 UIpp from 100 kHz to 150 MHz | |
| Output timing jitter: | |
| ≤1.0 UIpp from 10 Hz to 100 kHz | |
| ANALOG VIDEO INPUTS/OUTPUTS | |
| Type: | Analog video |
| Standard: | NTSC, PAL |
| Connector: | BNC |
| Impedance: | 75 ohm |
| Input return loss: | >45 dB to 6 MHz |
| Output return loss: | >45 dB to 6 MHz |
| Output level: | 1 Vp-p |
| Output DC offset: | 1 Vp-p, nominal |
| Input range: | ±30 mV relative to backporch |
| Insertion loss: | ±2 V 0 dB B10.1 dB all inputs to any one output |
| Freq. response: | ±0.1 dB to 8 MHz |
| Differential gain: | <0.1 dB |
| Differential phase: | <0.1 ° |
| Tilt: | <0.2 % |
| Delay scatter: | ±1.75 ° any input to any output |
| ±1.5 ° any input to any output slot (16 outputs) | |
| ±1.0 any input to any single output | |
| Noise spectrum: | >80 dB with pedestal unweighted to 7 MHz |
| CMRR: | >60 dB to 10 kHz |
| Crosstalk: | 57 dBrms worst case (100% PAL color bars), 72 dBrms worst case (single to adjacent crosstalk) |
| Output to output isolation: | >40 dB |
| ANALOG/DIGITAL VIDEO CONVERSION | |
| Type: | Analog digital video |
| Standard: | NTSC, PAL analog composite video |
| Connector: | BNC |
| Impedance: | 75 ohm |
| Level: | 1 Vp-p, nominal |
| Common moderange: | ±2 Vp-p |
| Freq.response (Input): | ±0.5 dB to 5.5 MHz (luminance) |
| Freq. response (Output): | ±0.2 dB to 5.5 MHz (luminance) |
| Luma/chroma delay: | <12 ns |
| Luma/chroma gain inequality: | <0.5 dB |
| Differential gain: | <0.3 % |
| Differential phase: | <0.3 ° |
| Pedestal (input): | >75 dB unweighted |
| Pedestal (output): | >75 dB unweighted |
| Ramp (input): | >50 dB unweighted |
| Ramp (output): | >62.5 dB unweighted |
| Time Code REFERENCE INPUT | |
| Type: | 1 BNC, 1 Phoenix |
| Standard: | SMPTE 12M |
| Connector: | BNC terminating, Phoenix |
| Impedance: | 75 ohm or 110 ohm |
| Time Code INPUTS/OUTPUTS | |
| Type: | Longitudinal Time Code |
| Standard: | SMPTE 12M |
| Connector: | Phoenix |
| Impedance: | 600 ohm or Hi-Z, selectable |
| Input level: | 100 mV to 10 Vp-p |
| Output level: | 2.0 Vp-p |
| PORT MACHINE INPUTS/OUTPUTS | |
| Type: | Bidirectional, dynamically configured |
| Standard: | EIA232 or EIA-422, ANSI/SMPTE 207M |
| Connector: | RJ-45 |
| Data rates: | Up to 115.2 kbps |
home | products | solutions | support | news | company | investors | resources | careers | contacts |