|
Sales contact
USA: (530) 265-1000 Europe: +44 (0) 118 952 3400 Canada: (514) 333-1772 Asia: +852-2539-6987 |
| ELECTRICAL | |
| AC input: | 90-130/180-250 VAC, 50/60 Hz, auto-ranging |
| AC fuses: | Power supplies: 8A (HB0145-00), slow blow; 90-130 V, 6.3A (HB0031-00), slow blow, 180-250 V |
| AC connectors | 8, IEC 320 (one for each PS6000 module installed) |
| AC power: | PS6000, 660 W, one IEC 320 |
| AC power usage: | Power based on PS6000 modules; 4 primary (4 optional redundant): 475 W nominal (512 x 512 sync AES), power factor corrected 900 W typical (256 x 256 stereo analog audio), power factor corrected |
| Power supply modules and module slots: | Required minimum number of PS6000 modules: 2 primary (2 optional redundant). One NV6257 power supply frame can power two routers. |
| Power supply dimensions: | 5RU high (8.75 in. , 222.2 mm) |
| 19.0 in. (483 mm) wide | |
| 21.0 in. (533 mm) deep | |
| Weight: | 55 lbs (25 kg); 105 lbs (47.5 kg) fully loaded |
| DC power: | NVISION connector and DC cable: WC0085 |
| Power supply alarm connection: | DB-25; reads each PS6000 status |
| Power supply monitor connection: | DB-25 |
| Regulatory compliance: | UL Listed and CE Compliant |
| MECHANICAL | |
| Dimensions: | 14RU (24.5 in., 622 mm) high |
| 19.0 in. (483 mm) wide | |
| 18.0 in. (457 mm) deep | |
| Weight: | 102 lbs (46.2 kg); 167 lbs (75.9 kg) fully loaded |
| Mounting: | EIA 310-C, 19.0 in. (483 mm) |
| Grounding terminal: | Copper, accepts 14-6 AWG |
| Modules and module slots: | 16 input cards, up to 32 signals each, 16 output cards, up to 32 signals each, 4 crosspoint cards, 2 control cards (1 primary, 1 optional secondary), 1 monitor card, 3 fan modules |
| DIAGNOSTIC | |
| Type: | Serial port |
| Standard: | SMPTE 207M, EIA-422/EIA-232, configurable |
| Connector: | 2, DE-9 |
| SERIAL CONTROL | |
| Type: | Serial port (2 per control card) |
| Standard: | SMPTE 207M, EIA-422, configurable |
| Connector: | 4, DE-9 |
| ETHERNET | |
| Type: | 10/100 Base T |
| Standard: | IEEE 802.3 |
| Protocol: | NVISION Ethernet protocol |
| Connector: | 2, RJ-45 |
| GSC NODE BUS | |
| Type: | Serial |
| Standard: | Proprietary |
| Connector: | 2, BNC, loop-thru, non-terminating pair |
| Impedance: | 75 ohm |
| OUTPUT SIGNAL MONITOR | |
| Type: | Digital audio and AESid |
| Standard: | See related section of this specification for standard for each monitored signal type |
| Connector: | BNC or Phoenix |
| Impedance: | 75 ohm or 110 ohm |
| Signal details: | See related section of this specification for details for each monitored signal type, I/O levels and return loss |
| EXPANSION CONTROL | |
| Type: | 10B2 port |
| Standard: | See related section of this specification for standard for each signal type sent between routers |
| Connector: | 2, BNC, loop thru |
| Impedance: | 75 ohm |
| Signal details: | See related section of this specification for details for each signal type, I/O levels and return loss |
| POWER SUPPLY MONITOR | |
| Connector: | DB-25 |
| ENVIRONMENTAL SPECIFICATIONS | |
| Operating temperature: | 0 to 40 șC. |
| Relative humidity: | 0 to 90 %, non-condensing |
| AUDIO REFERENCE INPUT | |
| Type: | Serial digital audio |
| Standard: | AES3 or AES3id |
| Sample rate: | 48 kHz |
| Connector: | 2, BNC or Phoenix |
| Impedance: | 75 ohm or 110 ohm |
| Input level: | 0.5 Vp-p to 2.0 Vp-p |
| AES3 INPUTS/OUTPUTS | |
| Type: | Balanced digital audio |
| Standard: | AES3 |
| Sample rate/single frame: synchronous 48, 96 or 192 kHz | |
| Sample rate/multiple frames: synchronous 48, 96 or 192 kHz | |
| Connector: | DB-25 |
| Impedance: | 110 ohm |
| Input level: | 200 mV to 10 Vp-p |
| Output level: | 2 Vp-p |
| AES3id INPUTS/OUTPUTS | |
| Type: | Unbalanced digital audio |
| Standard: | AES3id |
| Sample rate, single frame: synchronous 48, 96 or 192 kHz | |
| Sample rate, multiple frames: synchronous 48, 96 or 192 kHz | |
| Connector: | DIN 1.0/2.3 |
| Impedance: | 75 ohm |
| Input level: | 100 mV to 1.2 Vp-p |
| Output level: | 1 V +10 % |
| AES10 (MADI) INPUTS/OUTPUTS | |
| Type: | Unbalanced digital audio |
| Standard: | AES10 - sample rate, single frame: synchronous 48 or 96 kHz |
| Sample rate, multiple frames: synchronous 48 or 96 kHz | |
| Connector: | BNC |
| Impedance: | 75 ohm |
| Input level: | 150 mV to 600 mV |
| Output level: | 600 mV |
| ANALOG AUDIO INPUTS/OUTPUTS | |
| Type: | Analog audio |
| Standard: | 24-bit at 48 kHz |
| Sample rate: | 48 kHz |
| Connector: | DB-25 |
| Impedance: | Input >20 kohm, output 50 ohm |
| Input level: | FSD, +15, +18 and +24 dBu |
| Output level: | FSD, +15, +18 and +24 dBu, selectable +6 dB gain via switch |
| Freq. response: | 20 Hz to 20 kHz ±0.2 dB |
| THD: | <0.02 % at +4 dBu at 1 kHz |
| IMD: | <0.5 % (per SMPTE method using a 60 Hz +12 dBu wave and a 7 kHz 0 dBu sine wave) sine |
| Noise: | 95 dB below +24 dBu |
| Inter-route delay: | <1 μs |
| Input to output delay: | <1.2 ms |
| Crosstalk: | -80 dB worst case |
| Insertion gain | ±0.1 dB |
| CMRR: | >75 dB from 60 Hz to 20 kHz |
| VIDEO REFERENCE INPUT | |
| Type: | Analog video reference |
| Standard: | PAL, NTSC, or tri-level sync |
| Connector: | Loop-thru, BNC |
| Impedance: | 75 ohm or Hi-Z |
| Input level: | 0.5 Vp-p to 2.0 Vp-p |
| Input return loss: | ±30 dB to 5 MHz |
| Time Code REFERENCE INPUT | |
| Type: | 1 BNC, 1 Phoenix |
| Standard: | SMPTE 12M |
| Connector: | BNC terminating, Phoenix |
| Impedance: | 75 ohm or 110 ohm |
| Time Code INPUTS/OUTPUTS | |
| Type: | Longitudinal Time Code |
| Standard: | SMPTE 12M |
| Connector: | Phoenix |
| Impedance: | 600 ohm or Hi-Z, selectable |
| Input level: | 100 mV to 10 Vp-p |
| Output level: | 2.0 Vp-p |
home | products | solutions | support | news | company | investors | resources | careers | contacts |