|
Sales contact
USA: (530) 265-1000 Europe: +44 (0) 118 952 3400 Canada: (514) 333-1772 Asia: +852-2539-6987 |
| ELECTRICAL | ||
| AC input: | 90-130/180-250 VAC, 50/60 Hz, auto-ranging | |
| AC fuses: | Power supplies: 8A (HB0145-00), slow blow; 90-130 V, 6.3A (HB0031-00), slow blow, 180-250 V | |
| AC connectors: | 8, IEC 320 (one for each PS6000 module installed) | |
| AC power: | PS6000, 660 W, one IEC 320 | |
| AC power usage: | Power based on PS6000 modules; 4 primary (4 optional redundant): 1, 175 W nominal (256 x 256 SD or SWB), power factor corrected | |
| Power supply modules and module slots: | Required minimum number of PS6000 modules: 4 primary (4 optional redundant). One NV6257 power supply frame can power one router. | |
| Power supply dimensions: | 5RU high (8.75 inches, 222.2 mm) | |
| 19.0 in. (483 mm) wide | ||
| 21.0 in. (533 mm) deep | ||
| Weight: | 55 lbs (25 kg); 105 lbs (47.5 kg) fully loaded | |
| DC power: | NVISION connector and DC cable: WC0085 | |
| Power supply alarm connection: | DB-25; reads each PS6000 status | |
| Power supply monitor connection: | DB-25 | |
| Regulatory compliance: | UL Listed and CE compliant | |
| MECHANICAL | ||
| Dimensions: | 22RU (38.5 in., 998 mm) high | |
| 19.0 in. (483 mm) wide | ||
| 18.0 in. (457 mm) deep | ||
| Weight: | 132 lbs (60 kg); 328 lbs (149.1 kg) fully loaded | |
| Mounting: | EIA 310-C, 19.0 in. (483 mm) | |
| Grounding terminal: | Copper, accepts 14-6 AWG | |
| Modules and module slots: | 16 input cards, 16 input signals plus 16 expansion signals, 16 input filler cards, 16 expansion signals, 16 output cards, 16 signals each, 3 crosspoint cards (2 primary, 1 optional redundant), 2 control cards (1 primary, 1 optional secondary) 1 monitor card, 1 fan module | |
| DIAGNOSTIC | ||
| Type: | Serial port | |
| Standard: | SMPTE 207M, EIA-422/EIA-232, configurable | |
| Connector: | 2, DE-9 | |
| SERIAL CONTROL | ||
| Type: | Serial port (2 per control card) | |
| Standard: | SMPTE 207M, EIA-422, configurable | |
| Connector: | 4, DE-9 | |
| ETHERNET | ||
| Type: | 10/100 Base T | |
| Standard: | IEEE 802.3 | |
| Protocol: | NVISION Ethernet protocol | |
| Connector: | 2, RJ-45 | |
| GSC NODE BUS | ||
| Type: | Serial | |
| Standard: | Proprietary | |
| Connector: | 2, BNC, loop-thru, non-terminating pair | |
| Impedance: | 75 ohm | |
| OUTPUT SIGNAL MONITOR | ||
| Type: | Standard definition and high definition digital video | |
| Standard: | See related section of this specification for standard for each monitored signal type. | |
| Connector: | BNC | |
| Impedance: | 75 ohm | |
| Signal details: | See related section of this specification for details for each monitored signal type, including jitter, I/O levels and return loss | |
| EXPANSION CONTROL | ||
| Type: | 10B2 port | |
| Standard: | See related section of this specification for standard for each signal type sent between routers | |
| Connector: | 2, BNC, loop thru | |
| Impedance: | 75 ohm | |
| Signal details: | See related section of this specification for details for each signal type, I/O levels and return loss | |
| EXPANSION I/Os | ||
| Type: | Proprietary | |
| Standard: | See related section of this specification for standard for each signal type sent between routers | |
| Connector: | 8, proprietary, NVISION cable WC0056-00 | |
| Signal details: | See related section of this specification for details for each signal type, I/O levels and return loss | |
| REDUNDANT CROSSPOINT CONTROL | ||
| Connector: | DB-25 | |
| POWER SUPPLY MONITOR | ||
| Connector: | DB-25 | |
| ENVIRONMENTAL SPECIFICATIONS | ||
| Operating temperature: | 0 to 40 șC | |
| Relative humidity: | 0 to 90 %, non-condensing | |
| AUDIO REFERENCE INPUT | ||
| Type: | Serial digital audio | |
| Standard: | AES3 or AES3id | |
| Sample rate: | 48 kHz | |
| Connector: | 2, BNC or Phoenix | |
| Impedance: | 75 ohm or 110 ohm | |
| Input level: | 0.5 Vp-p to 2.0 Vp-p | |
| VIDEO REFERENCE INPUT | ||
| Type: | Analog video reference | |
| Standard: | PAL, NTSC, or Tri-Level Sync | |
| Connector: | Loop-thru, BNC | |
| Impedance: | 75 ohm or Hi-Z | |
| Input level: | 0.5 Vp-p to 2.0 Vp-p | |
| Input return loss: | ||
| ≥ 30 dB to 5 MHz | ||
| SD INPUTS/OUTPUTS | ||
| Type: | Standard definition serial digital video | |
| Standard: | SMPTE 259M and 344M | |
| Data rates: | 143, 177, 270, 360 or 540 Mbps or auto bypass | |
| Auto reclocking: | Data rates pass-through, 10 Mbps to 540 Mbps | |
| Connector: | BNC | |
| Impedance: | 75 ohm | |
| Cable equalization: | 350 m Belden 1694A, 200 m Belden 1855A, or equivalent cable, at 270 Mbps | |
| Router path: | Non-inverting | |
| Input and output return loss: | >15 dB, 5 to 540 MHz | |
| Output level: | 800 mVp-p +10 % | |
| Output rise/fall time: | 600 ps +10 % | |
| Output overshoot: | <10 % of amplitude max | |
| Output alignment jitter: | <0.2 UIpp from 1.0 kHz to 27 MHz | |
| Output timing jitter: | <0.2 UIpp from 10 Hz to 1.0 kHz | |
| (SD AND HD) INPUTS/OUTPUTS | ||
| Type: | High definition serial digital video | |
| Standard: | SMPTE 259M, 344M and 292M | |
| Data rates: | Auto reclocking at 143, 177, 270, 360, 540 Mbps and 1.483 and 1.485 Gbps or auto bypass | |
| Data rates: | Pass-through at 10 Mbps to 1.5 Gbps | |
| Connector: | BNC | |
| Impedance: | 75 ohm | |
| Cable equalization: | 150 m Belden 1694A, 85 m Belden 1855A, or equivalent cable, at 1.5 Gbps | |
| Router path: | Non-inverting | |
| Output level: | 800 mVp-p +10b % | |
| Input and output return loss: | >15 dB, 5 MHz to 1.5 GHz | |
| Output rise/fall time: | ||
| ≥270 ps | ||
| Output overshoot: | ||
| ≥10 % of amplitude max | ||
| Output alignment jitter: | ||
| ≥0.2 UIpp from 100 kHz to 150 MHz | ||
| Output timing jitter: | ||
| ≥1.0 UIpp from 10 Hz to 100 kHz | ||
| INPUTS/OUTPUTS (3Gbps/HD/SD) | ||
| Type: | High definition serial digital video | |
| Standard: | SMPTE 259M-C, 292M and 424M | |
| Data rate: | Auto reclocking at 270 Mbps and 1.483, 1.485, 2.966, 2.970 Gbps or auto bypass | |
| Data rate: | Pass-through at 10 Mbps to 3.0 Gbps | |
| Connector: | BNC | |
| Impedance: | 75 ohm | |
| Cable equalization (for cables listed or equivalent cable): | 400 m Belden 1694A, 250 m Belden 1855A 270 Mbps | |
| 150 m Belden 1694A, 100 m Belden 1855A at 1.5 Gbps | ||
| 100 m Belden 1694A, 45 m Belden 1855A at 3.0 Gbps | ||
| Router path: | Non-inverting | |
| Output level: | 800 mVp-p ±10 % | |
| Input and output return loss: | >15 dB, 5 MHz to 1.5 GHz | |
| >10 dB, 1.5 GHz to 3.0 GHz | ||
| Output rise/fall time: | ||
| ≥135 ps | ||
| Output overshoot: | ||
| ≥10 % of amplitude max | ||
| Output alignment jitter: | ||
| ≥0.3 UIpp from 100 kHz to 300 MHz | ||
| Output timing jitter: | ||
| ≥2.0 UIpp from 10 Hz to 100 kHz | ||
| ANALOG/DIGITAL VIDEO CONVERSION | ||
| Type: | Analog digital video | |
| Standard: | NTSC, PAL analog composite video | |
| Connector: | BNC | |
| Impedance: | 75 ohm | |
| Level: | Vp-p, nominal | |
| Common mode range: | ±2 Vp-p | |
| Frequency response (input): | ±0.5 dB to 5.5 MHz (luminance) | |
| Frequency response (output): | ±0.2 dB to 5.5 MHz (luminance) | |
| Luma/chroma delay: | <12 ns | |
| Luma/chroma gain inequality: | <0.5 dB | |
| Differential gain: | <0.3 % | |
| Differential phase: | <0.3 ° | |
| Pedestal (input): | >75 dB unweighted | |
| Pedestal (output): | >75 dB unweighted | |
| Ramp (input): | >50 dB unweighted | |
| Ramp (output): | >62.5 dB unweighted | |
| TIME CODE REFERENCE INPUT | ||
| Type: | 1 BNC, 1 Phoenix | |
| Standard: | SMPTE 12M | |
| Connector: | BNC terminating, Phoenix | |
| Impedance: | 75 ohm or 110 ohm | |
home | products | solutions | support | news | company | investors | resources | careers | contacts |