|
Sales contact
USA: (530) 265-1000 Europe: +44 (0) 118 952 3400 Canada: (514) 333-1772 Asia: +852-2539-6987 |
| ELECTRICAL | |
| AC input: | 90-130/180-250 VAC, 50/60 Hz, auto-ranging |
| AC fuses: | No user serviceable fuses |
| AC connectors: | 4, IEC 320 (one for each PS8100 module installed) |
| AC power: | PS8100, 1, 125 W, one IEC 320 |
| AC power usage: | NV8288: Power based on PS8100 modules; 2 primary (2 optional redundant): 1, 300 W nominal (288 x 576), power factor corrected |
| NV8288-Plus: Power based on PS8100 modules; 2 primary (2 optional redundant): 1, 150 W nominal (288 x 288), power factor corrected | |
| Power supply modules and module slots: | NV8288: Required minimum number of PS8100 modules: 2 primary (2 optional redundant) |
| NV8288-Plus: Required minimum number of PS8100 modules: 2 primary (2 optional redundant) | |
| Power supply dimensions: | 3RUs high (5.25 in., 133.35 mm) |
| 19.0 in. (483 mm) wide | |
| 16.0 in. (407 mm) deep | |
| Weight: | 24 lbs (10.9 kg); 50 lbs (22.7 kg) fully loaded |
| DC power: | NVISION connector and DC cable: WC0096 |
| Power supply alarm connection: | DE-9; reads each PS8100 status |
| Power supply monitor connection: | DB-25 |
| Regulatory compliance: | UL listed and CE compliant |
| MECHANICAL | |
| Dimensions: | 10RU (17.5 in., 445 mm) high |
| 19.0 in. (483 mm) wide | |
| 12.0 in. (305 mm) deep | |
| Weight: | NV8288: 58 lbs (26.4 kg); 130 lbs (59.1 kg) fully loaded |
| NV8288-Plus: 58 lbs (26.4 kg); 130 lbs (59.1 kg) fully loaded | |
| Mounting: | EIA 310-C, 19.0 inches (483 mm) |
| Grounding terminal: | Copper, accepts 14-6 AWG |
| Modules and module slots: | NV8288: 24 input cards, 12 signals each, 48 output cards, 12 signals each, 2 crosspoint cards, 2 control cards (1 primary, 1 optional secondary), 1 monitor cardset, 2 fan modules |
| NV8288-Plus: 24 input cards, 12 signals each, 48 output cards, 6 output signals plus 6 expansion signals, 48 output filler cards, 6 expansion signals, 2 crosspoint cards, 2 control cards (1 primary, 1 optional secondary), 1 monitor cardset 2 fan modules | |
| DIAGNOSTIC | |
| Type: | Serial port, 38.4 baud, 8-N-1 |
| Standard: | SMPTE 207M, EIA-232, non-configurable |
| Connector: | 2, DE-9 |
| SERIAL CONTROL | |
| Type: | Serial port (2 per control card) |
| Standard: | SMPTE 207M, EIA-422, configurable |
| Connector: | 4, DE-9 |
| ETHERNET | |
| Type: | 10/100 Base T |
| Standard: | IEEE 802.3 |
| Protocol: | NVISION Ethernet protocol |
| Connector: | 2, RJ-45 |
| OUTPUT SIGNAL MONITOR | |
| Type: | Standard definition and high definition digital video |
| Standard: | See related section of this specification for standard for each monitored signal type |
| Connector: | DIN 1.0/2.3 |
| Impedance: | 75 ohm |
| Signal details: | See related section of this specification for details for each monitored signal type, I/O levels and return loss |
| EXPANSION CONTROL (NV8288-Plus) | |
| Type: | 10B2 port |
| Standard: | See related section of this specification for details for each monitored signal type, including jitter, I/O levels and return loss |
| Connector: | 2, BNC, loop-thru |
| Impedance: | 75 ohm |
| Signal details: | See related section of this specification for details for each signal type, I/O levels and return loss |
| EXPANSION I/Os (NV8288-Plus) | |
| Type: | Proprietary |
| Standard: | See related section of this specification for standard for each signal type sent between routers |
| Connector: | 48, proprietary, NVISION cable WC0089-00 |
| Signal details: | See related section of this specification for details for each signal type, I/O levels and return loss |
| POWER SUPPLY MONITOR | |
| Connector | DB-25 |
| ENVIRONMENTAL SPECIFICATIONS | |
| Operating temperature: | 0 to 40 șC |
| Relative humidity: | 0 to 90 %, non-condensing |
| VIDEO REFERENCE INPUT | |
| Type: | Analog video reference |
| Standard: | PAL, NTSC, or Tri-Level Sync |
| Connector: | Loop-thru, BNC |
| Impedance: | 75 ohm or Hi-Z |
| Input level: | 0.5 Vp-p to 2.0 Vp-p |
| Input return loss: | |
| ≥30 dB to 5 MHz | |
| SD INPUTS/OUTPUTS | |
| Type: | Standard definition serial digital video |
| Standard: | SMPTE 259M and 344M |
| Data rates: | Auto reclocking: 143, 177, 270, 360 or 540 Mbps or auto bypass |
| Data rates: | Pass-through, 10 Mbps to 540 Mbps |
| Connector: | DIN 1.0/2.3 |
| Impedance: | 75 ohm |
| Cable equalization: | 350 m Belden 1694A, 200 m Belden 1855A, or equivalent cable, at 270 Mbps |
| Router path: | Non-inverting |
| Input/output return loss: | >15 dB, 5 to 540 MHz |
| Output level: | 800 mVp-p ±10 % |
| Output rise/fall time: | 600 ps ±10 % |
| Output overshoot: | |
| ≤10 % of amplitude max | |
| Output alignment jitter: | |
| ≤0.2 UIpp from 1.0 kHz to 27 MHz | |
| Output timing jitter: | |
| ≤0.2 UIpp from 10 Hz to 1.0 kHz | |
| SWB (SD AND HD) INPUTS/OUTPUTS | |
| Type: | High definition serial digital video |
| Standard: | SMPTE 259M, 344M and 292M |
| Data rate: | Auto reclocking at 143, 177, 270, 360, 540 Mbps and 1.483 and 1.485 Gbps or auto bypass |
| Data rate: | Pass-through at 10 Mbps to 1.5 Gbps |
| Connector: | DIN 1.0/2.3 |
| Impedance: | 75 ohm |
| Cable equalization: | 150m Belden 1694A, 85m Belden 1855A, or equivalent cable, at 1.5 Gbps |
| Router path: | Non-inverting |
| Output level: | 800 mVp-p ±10 % |
| Input/output return loss: | >15 dB, 5 MHz to 1.5 GHz |
| Output rise/fall time: | |
| ≤270 ps | |
| Output overshoot: | |
| ≤10 % of amplitude max | |
| Output alignment jitter: | |
| ≤0.2 UIpp from 100 kHz to 150 MHz | |
| Output timing jitter: | |
| ≤1.0 UIpp from 10 Hz to 100 kHz | |
| INPUTS/OUTPUTS (3Gbps/HD/SD) | |
| Type: | High definition serial digital video |
| Standard: | SMPTE 259M-C, 292M and 424M |
| Data rate: | Auto reclocking at 270 Mbps and 1.483, 1.485, 2.966, 2.970 Gbps or auto bypass |
| Data rate: | Pass-through at 10 Mbps to 3.0 Gbps |
| Connector: | DIN 1.0/2.3 |
| Impedance: | 75 ohm |
| Cable equalization: | 400 m Belden 1694A, 250 m Belden (for cables listed or 1855A at 270 Mbps, 150 m Belden equivalent cable) 1694A, 100 m Belden 1855A at 1.5 Gbps, 100 m Belden 1694A, 45 m Belden, 1855A at 3.0 Gbps |
| Router path: | Non-inverting |
| Output level: | 800 mVp-p ±10 % |
| Input/output return loss: | >15 dB, 5 MHz to 1.5 GHz |
| >10 dB, 1.5 GHz to 3.0 GHz | |
| Output rise/fall time: | |
| ≤135 ps | |
| Output overshoot: | |
| ≤10 % of amplitude max | |
| Output alignment jitter: | |
| ≤0.3 UIpp from 100 kHz to 300 MHz | |
| Output timing jitter: | |
| ≤2.0 UIpp from 10 Hz to 100 kHz | |
| Time Code REFERENCE INPUT | |
| Type: | 1 BNC |
| Standard: | SMPTE 12M |
| Connector: | BNC terminating |
| Impedance: | 75 ohm |
home | products | solutions | support | news | company | investors | resources | careers | contacts |