NVISION 8500 HYBRID

---

Introduction

---

---

---

---

---

---

---

---

---

---

---

---

Sales contact USA: (530) 265-1000 Europe: +44 (0) 118 952 3400 Canada: (514) 333-1772 Asia: +852-2539-6987

ELECTRICAL
PS8100 (FR8144 only)
AC input:	90-130/180-250 VAC, 50/60 Hz, Auto-ranging, 15 Amp
AC fuses:	No user serviceable fuses
AC connectors:	Female - IEC 320-C13 (one for each PS8100 module installed)
	Male – NEMA 5-15p
AC power:	PS8100, 850 Watts, one IEC 320-C13
AC power usage:	Power based on PS8100 modules.
NV8144:
Coax:	850 Watts nominal (144 x 144), power factor corrected
Fiber optic:	900 Watts nominal (144 x 144), power factor corrected
Hybrid:	900 Watts nominal (144 x 144), power factor corrected
NV8300 and PS8300 (FR8280, FR8567, and FR8576-Plus)
AC input:	90-130/180-250 VAC, 50/60 Hz, Auto-ranging, 20 Amp
AC fuses:	No user serviceable fuses
AC connectors:	Female - IEC 320-C19 (one for each PS8300 module installed)
	Male – NEMA L5-20P Locking (one for each PS8300 module installed)
AC power:	PS8300, 1,350 Watts, one IEC 320-C19 AC power usage
NV8280:
Coax:	1,750 Watts nominal (288 x 576), power factor corrected
Fiber optic:	2,100 Watts nominal (288 x 576), power factor corrected
Hybrid:	2,700 Watts nominal (288 x 576), power factor corrected
NV8576, NV8576-Plus:
Coax:	3,400 Watts nominal, power factor corrected
Fiber optic:	4,250 Watts nominal, power factor corrected
Hybrid:	5,400 Watts nominal, power factor corrected (576 x 1152, 576 x 576 expandable) (each frame requires two NV8300 frames)
DIAGNOSTIC
Type:	Serial port
Standard :	SMPTE 207M, EIA-422/EIA-232, configurable
Connector:	2, DE-9
SERIAL CONTROL
Type:	Serial port (2 per control card)
Standard:	SMPTE 207M, EIA-422
Connector:	4, DE-9
ETHERNET
Type:	10/100 Base T
Standard:	IEEE 802.3
Protocol:	NVISION Ethernet protocol
Connector:	2, RJ-45
OUTPUT SIGNAL MONITOR
Type:	Standard definition and high definition digital video
Standard:	See related section of this specification for standard for each monitored signal type
Connector:	DIN 1.0/2.3
Impedance:	75 ohm
Signal details:	See related section of this specification for details for each monitored signal type, I/O levels and return loss (FR8576-Plus only)
EXPANSION I/O
Type:	Proprietary
Standard:	See related section of this specification for standard for each signal type sent between routers
Connector:	128, proprietary
Signal details:	See related section of this specification for details for each signal type, I/O levels and return loss (FR8576-Plus only)
CONTROL EXPANSION
Type:	10Base2 port
Connector:	2, BNC, loop-thru
Impedance:	50 ohm
POWER SUPPLY MONITOR (except FR8144)
Connector:	DB-25
ENVIRONMENTAL SPECIFICATIONS
Operating temperature:	0 to 40 ºC
Relative humidity:	0 to 90 %, non condensing
VIDEO REFERENCE INPUT
Type:	Analog video reference
Standard:	PAL, NTSC, or tri-level sync
Connector:	Loop-thru, BNC
Impedance:	75 ohm or Hi-Z (>20,000 ohm), not selectable
Input level:	0.5 Vp-p to 2.0 Vp-p
Input return loss:	>30 dB to 5 MHz
Output timing jitter:	<0.2 Ulpp from 10 Hz to 1.0 kHz
INPUTS/OUTPUTS (HD/SD)
Type:	High definition serial digital video
Standard:	SMPTE 259M and 292M
Data rates:	Auto re-clocking at 270 Mbps and 1.483, 1.485 Gbps or auto bypass with pass-through from 19 Mbps to 1.5 Gbps
Connector:	DIN 1.0/2.3
Impedance:	75 ohm
Cable equalization:	150 m Belden 1694A, 85 m Belden 1855A, or equivalent cable, at 1.5 Gbps
Router path:	Non-inverting
Input and output return loss:	>15 dB, 5 MHz to 1.5 GHz
Output level:	800 mVpp ±10 %
Output rise/fall time:
	≤270 ps
Output overshoot:
	≤10 % of amplitude max
Output alignment jitter:
	≤0.2 UIpp from 100 kHz to 150 MHz
Output timing jitter:
	≤1.0 UIpp from 10 Hz to 100 kHz
INPUTS/OUTPUTS (3Gbps/HD/SD)
Type:	High definition serial digital video
Standard:	SMPTE 259M, 344M, 292M and 424M
Data rates for auto reclocking:	270 Mbps and 1.483, 1.485, 2.966, 2.970 Gbps or auto bypass with pass-through from 19 Mbps to 3.0 Gbps
Connector:	DIN 1.0/2.3
Impedance:	75 ohm
Cable equalization (for cables listed or equivalent cable):	400 m Belden 1694A, 250 m Belden 1855A at 270 Mbps 150 m Belden 1694A, 100 m Belden 1855A at 1.5 Gbps 100 m Belden 1694A, 45 m Belden 1855A at 3.0 Gbps
Router path:	Non-inverting
Output level:	800 mVp-p ±10 %
Input and output return loss:	>15 dB, 5 MHz to 1.5 GHz; >10 dB, 1.5 GHz to 3.0 GHz
Output rise/fall time:
	≥135 ps
Output overshoot:
	≥10 % of amplitude max
Output alignment jitter:
	≥0.3 UIpp from 100 kHz to 300 MHz
Output timing jitter:
	≥2.0 UIpp from 10 Hz to 100 kHz